UGC Net July 16 General Paper Part2

21. Which of the following are the fundamental duties?
(a) To respect the National Flag
(b) To Protect and improve the natural environment
(c) For a parent to provide opportunities for education to his/her child.
(d) To protect monuments and places of national importance
Select the correct answer from the codes given
Codes : 
(1) (a),(b) and (c)
(2) (a),(b) and (d)
(3) (a),(c) and (d)
(4) (a),(b),(c) and (d)
Answer : 1

22. Which of the following statements are correct in respect of Niti Aayog?
(a) It is a constitutional body
(b) It is a statutory body.
(c) It is neither a constitutional body for not a statutory body
(d) It is a think-tank
Select the correct answer from the codes given below:
(1) (a) and (d)
(2) (b) and (d)
(3) (c) and (d)
(4) (b),(c) and (d)
Answer : 3

23. Which of the following core values among the institutions of higher education are promoted by the NAAC (National Assessment and Accreditation Council)?
(a) Contributing to national development.
(b) Fostering global competencies among the students.
(c) Inculcating a value system among students and teachers
(d) Promoting the optimum utilization of the infrastructure.
Select the correct answer from the codes given below:
Codes : 
(1) (a), (c) and (d)
(2) (a),(b) and (c)
(3) (a) ,(c) and (d)
(4). (a),(b),(c) and (d)
Answer : 2

24. The best way for providing value education is through
(1) discussion on scriptural text
(2) lectures/discourses on values
(3) seminars/symposia on valus
(4) mentoring/reflective sessions on values
Answer : 4

25. A college level assistant professor has planned his/her lectures with an intent to develop cognitive dimensions of students centered on skills of analysis and synthesis. Below, given are two sets of items Set - I consisting of levels of cognitive interchange and Set - II comprising basic requirements for promoting them. Match the two sets and indicate your answer by choosing the correct alternative from the code:

Set - I                                         Set - II

(Levels of Cognitive              (Basic requirements for promoting

Interchange)                            cognitive interchange)

a. Memory level                        i. Giving opportunity for discriminating examples

and non-examples of a point.

b. Understanding level               ii. Recording the important points made

during the presentations.

c. Reflective level                    iii. Asking the students to discuss various

items of information.

iv. Critically analyzing the points to be

made and discussed.

Codes:

      a   b   c

(1) ii   iv   i

(2) iii  iv   ii

(3) ii   i    iv

(4) i   ii    iii

Answer : 3

26. Which set of learner characteristics may be considered helpful in designing effective teaching-learning systems? Select the correct alternative from the codes given below:

(i) Prior experience of learners in respect of the subject.(ii) Interpersonal relationships of learner’s family friends.(iii) Ability of the learners in respect of the subject. (iv) Student’s language background.(v) Interest of students in following the prescribed dress code.(vi) Motivational-orientation of the students.Codes:
(1) (i), (ii), (iii) and (iv)             (2) (i), (iii), (iv) and (vi)

(3) (ii), (iii), (iv) and (v)            (4) (iii), (iv), (v) and (vi)

Answer : 2

27. Assertion (A): The purpose of higher education is to promote critical and creative thinking abilities among students.

Reason (R): These abilities ensure job placements.

Choose the correct answer from the following code:

(1) Both (A) and (R) are true and (R) is the correct explanation of (A).

(2) Both (A) and (R) are true but (R) is not the correct explanation of (A).

(3) (A) is true and (R) is false.

(4) (A) is false and (R) is true.

Answer : 2

28. Match the items of the first set with that of the second set in respect of evaluation system. Choose the correct code:

                  Set - I                                                     Set - II

a. Formative evaluation                      i. Evaluating cognitive and co-cognitive aspects

with regularity

b. Summative evaluation                   ii. Tests and their interpretations based on a

group and certain yardsticks

c. Continuous and comprehensive             iii. Grading the final learning outcomes

evaluation                                        

d. Norm and criterion referenced      iv. Quizzes and discussions

tests   

Codes:

      a    b    c   d

(1) iv    iii   i     ii

(2) i      ii   iii   iv

(3) iii    iv   ii    i

(4) i     iii   iv   ii
Answer : 1

    29. Select the alternative which consists of positive factors contributing to effectiveness of teaching:

List of factors:

(a) Teacher’s knowledge of the subject.

(b) Teacher’s socio-economic background.

(c) Communication skill of the teacher.

(d) Teacher’s ability to please the students.

(e) Teacher’s personal contact with students.

(f) Teacher’s competence in managing and monitoring the classroom transactions.

Codes:

(1) (b), (c) and (d)                    (3) (c), (d) and (f)

(2) (b), (d) and (e)                    (4) (a), (c) and (f)

Answer : 4

30 .The use of teaching aids is justified on the grounds of

(1) Attracting student’s attention in the class room.

(2) Minimizing indiscipline problems in the classroom.

(3) Optimizing learning outcomes of students.

(4) Effective engagement of students in learning tasks.

Answer : 3

Back

January, 2011 M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

January, 2011
M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)
1.1 ‘C’ Programming Language was developed and written by
A) Martin Richards
B) Dennis Ritchie
C) Ken Thompson
D) Herman Hellorith
Answer 

July, 2011 M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

July, 2011
M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be answered in
the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,
who complete PART ONE earlier than one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate
one and enter in the “tear-off” answer sheet attached to the question paper, following
instructions therein. (1x10)
1.1 Which of the following cannot be checked in a switch case statement?
A) Character
B) Integer
C) Float
D) enum
Answer

UGC Net Computer Science Genaral Paper July 16

1. In which year , the percentage profit earned by the company B is less then that of company A ?

(1) 2012

(2) 2013

(3) 2014

(4) 2015
Answer : 2
2. If the total expenditure of the two companies was ~9 lakh in the year 2012 and the expenditure of A and B were in the ratio 2:1, then what was the income of the company A in that year?

(1) 9.2 lakh

(2) 8.1 lakh

(3) 7.2 lakh

(4) 6.0 lakh
Answer : 2

January, 2012 M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

January, 2012
M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

NOTE:

1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and

PART TWO contains FIVE questions.

2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However,candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)
1.1 What would be value of j after the following is executed?
k=17;
j=6;
if (k < 10)
j=8;
j=j+1;
j=j+2;
A) 8
B) 9
C) 7
D) 10
Answer 

July, 2012 M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

 July, 2012
M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “tear-off” answer sheet attached to the question paper, following instructions therein. (1x10)

1.1 Which of the following is not an unconditional control statement in ‘C’?
A) break
B) continue
C) exit()
D) while
Answer

July- 2013 M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE (Solve)

 July, 2013
M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE
NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.
TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 In the passage of text, individual words and punctuation marks are known as
A) Constants
B) Keywords
C) Operators
D) Tokens
Answer 

January 2013 M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

 January, 2013
M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be answered in
the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,
who complete PART ONE earlier than one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “tear-off” answer sheet attached to the question paper, following instructions therein. (1x10)

1.1 If a=8, b=3 and c=-5 are integers, then value of a*b/c is
A) -4
B) -2.8
C) +2.8
D) +3
Answer

Passing more than one control to single java script function

The Javascript function has built in object called arguments like this pointer in C++. When a function of Java script is called all the arguments, copy to built in arguments array. You use this array as normal as another array following code is a demo of my word..

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Multiple Argument to Java Script Function : Girfa</title>
<script language="javascript">
function read_data()
{

var i;

for(i=0;i<arguments.length;i++)
{
var ob=document.getElementById(arguments[i]);
s1.innerHTML=s1.innerHTML +  ob.value +  '<br>';
}
}
</script>
</head>

M3-R4: PROGRAMMING & PROBLEM SOLVING THROUGH ‘C’ LANGUAGE January, 2014

January, 2014
M3-R4: PROGRAMMING & PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.

2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However,candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 What will be output if you will compile and execute the following c code?
#include<stdio.h>
int main(){ int a=5; float b;
printf("%d",sizeof(++a+b)); printf(" %d",a); return 0;}
A) 2 6
B) 4 6
C) 2 5
D) 4 5
Answer

M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE July, 2014

M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE
July, 2014

NOTE:

1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.

2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question

paper, as per the instructions contained therein. PART ONE is NOT to be answered in the
answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However, candidates,

who complete PART ONE earlier than one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 Which of the following function declaration need not have a return statement in its body?
A) int a(char *s)
B) void b(int a[], int n)
C) float *c()
D) short d(long x)
Answer

1.2 Identify the correct sequence of steps to run a program
A) link, load, code, compile and execute
B) code, compile, link, execute and load
C) code, compile, link, load and execute
D) compile, code, link, load and execute
Answer

M3-R4: PROGRAMMIMG AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE January, 2015

M3-R4: PROGRAMMIMG AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

NOTE:
IMPORTANT INSTRUCTIONS:

1. Question Paper in English and Hindi and Candidate can choose any one language.
2. In case of discrepancies in language, English version will be treated as final.
3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question
paper, as per the instructions contained therein. PART ONE is NOT to be answered in the
answer book.
5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,
who complete PART ONE earlier than one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 The two type of file structures existing in VSAM file are
A) Key sequenced structures, entry sequenced structures
B) Key sequenced structure, exit sequenced structures
C) Entry sequenced structures, exit sequenced structures
D) None of the above

View

M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE July, 2015

M3-R4: PROGRAMMING AND PROBLEM SOLVING THROUGH ‘C’ LANGUAGE

NOTE:
IMPORTANT INSTRUCTIONS:

1. Question Paper in English and Hindi and Candidate can choose any one language.
2. In case of discrepancies in language, English version will be treated as final.

3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and

PART TWO contains FIVE questions.

4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However,candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 Which of the following is the correct order of evaluation for the below expression?
z = x + y * z / 4 % 2 - 1
A) * / % + - =
B) = * / % + -
C) / * % - + =
D) * % / - + =

View Answer

M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN-July-12

Page 1 of 4 July, 2012

M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However,candidates, who complete PART ONE earlier than one hour, can collect the answer book for

PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS
 TOTAL MARKS: 100

(PART ONE – 40; PART TWO – 60)
PART ONE
(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “tear-off” answer sheet attached to the question paper, following instructions therein. (1x10)

1.1 E-mail message can be protected by
A) Encryption
B) Caching
C) Mirroring
D) Shadowing
Answer

M2-R4 INTERNET TECHNOLOGY AND WEB DESIGN-Jan-13

 January, 2013

M2-R4 INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the

question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the

answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who
complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “tear-off” answer sheet attached to the question paper, following instructions therein. (1x10)

1.1 TCP is a commonly used protocol at
A) Applications layer
B) Network layer
C) Transport Layer
D) Physical Layer
Answer

Marquee

Next Fun

HTML Heading

HTML Heading

M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN July, 2013

M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.
2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100

(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “OMR” answer sheet supplied with the question
paper, following instructions therein. (1x10)
1.1 On the Internet which version of Internet Protocol is most widely used
A) IPv1
B) IPv3
C) IPv4
D) IPv6
Answer

M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN January, 2014

M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.

2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)
1.1 ________ are networks that connect people within a company to each other and to the
company network.
A) Extranets
B) Internets
C) Bitstreams
D) Intranets
Answer

 July, 2014
M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.

2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be

supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for  PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “OMR” answer sheet supplied with the question
paper, following instructions therein. (1x10)
1.1 What is Internet?
A) A Single Network
B) A vast collection of different networks
C) Interconnection of Local Area Networks
D) None of the above
Answer

January, 2015
M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
IMPORTANT INSTRUCTIONS:

1. Question Paper in English and Hindi and Candidate can choose any one language.

2. In case of discrepancies in language, English version will be treated as final.

3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.

4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question

paper, as per the instructions contained therein. PART ONE is NOT to be answered in the

answer book.
5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,

who complete PART ONE earlier than one hour, can collect the answer book for PART TWO

immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate
one and enter in the “OMR” answer sheet supplied with the question paper, following
instructions therein. (1x10)

1.1 The memory allocation scheme subject to “external” fragmentation is
A) segmentation
B) swapping
C) pure demand paging
D) multiple fixed contiguous partitions
Answer

Network Layer

Network Layer

What is Network Layer?

The network layer is concerned with getting packets from the source all the way to the destination. The packets may require to make many hops at the intermediate routers while reaching the destination. This is the lowest layer that deals with end to end transmission. In order to achieve its goals, the network layer must know about the topology of the communication network. It must also take care to choose routes to avoid overloading of some of the communication lines while leaving others idle. The network layer-transport layer interface frequently is the interface between the carrier and the customer, that is the boundary of the subnet. The functions of this layer include :

Set Relation

Set Relation Explanation , Relation,Symmetric,Reflexive,Transitive,Equivalence 

Relation

July, 2015 M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

 July, 2015
M2-R4: INTERNET TECHNOLOGY AND WEB DESIGN

NOTE:
IMPORTANT INSTRUCTIONS:

1. Question Paper in English and Hindi and Candidate can choose any one language.

2. In case of discrepancies in language, English version will be treated as final.

3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.

4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question

paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,
who complete PART ONE earlier than one hour, can collect the answer book for PART TWO
immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS TOTAL MARKS: 100

(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate
one and enter in the “OMR” answer sheet supplied with the question paper, following
instructions therein. (1x10)
1.1 What is World Wide Web?
A) A computer game
B) A software program
C) Another name for the Internet
D) The part of the Internet that enables information sharing
Answer

July, 2015 M1-R4: IT TOOLS AND BUSINESS SYSTEMS

July, 2015
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
IMPORTANT INSTRUCTIONS:
1. Question Paper in English and Hindi and Candidate can choose any one language.

2. In case of discrepancies in language, English version will be treated as final.

3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.

4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question

paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However, candidates,

who complete PART ONE earlier than one hour, can collect the answer book for PART TWO

immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS                                                     TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 EEPROM stands for
A) Electrically Erasable Programmable Read of Memory
B) Erasable Electrically Programmable Read Only Memory
C) Easily Erasable Programmable Read Only Memory
D) Electrically Erasable Programmable Read Only Memory
Answer

Long and medium term scheduling os

Types of scheduling - Long and medium term scheduling

In single task operating systems the issue of scheduling is trivial: after the system has set up the execution environment of a process, CPU control is given to it until the process itself exits. In a pun, the system is not operating at all during the program's execution, save for providing services through subroutine calls. It's only with multi-tasking operating systems that scheduling becomes a top entry in a designer's agenda.

In many multitasking systems the processor scheduling subsystem operates on three levels, differentiated by the time scale at which they perform their operations. In this sense we differentiate among:

 January, 2015
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
IMPORTANT INSTRUCTIONS:

1. Question Paper in English and Hindi and Candidate can choose any one language. 2. In case of discrepancies in language, English version will be treated as final.

3. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.

4. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question

paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

5. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS
 TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “OMR” answer sheet supplied with the question
paper, following instructions therein. (1x10)
1.1 Numbers in base 16 are called as
A) Octal System
B) Hexadecimal System
C) Decimal System
D) Binary Numbering System

July-2014 M1-R4: IT TOOLS AND BUSINESS SYSTEMS

 July, 2014
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:

1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.

2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be

answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3
HOURS TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most  appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 Which of this not a input device
A) Joystick
B) Keyboard
C) Printer
D) Mouse
Answer

July, 2014 M1-R4: IT TOOLS AND BUSINESS SYSTEMS

 July, 2014

M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:

1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions.

2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the question paper, as per the instructions contained therein. PART ONE is NOT to be answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be supplied at the table when the answer sheet for PART ONE is returned. However, candidates, who complete PART ONE earlier than one hour, can collect the answer book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS
              
TOTAL MARKS: 100

(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question paper, following instructions therein. (1x10)

1.1 Which of this not a input device
A) Joystick
B) Keyboard
C) Printer
D) Mouse
Answer

July, 2013 M1-R4: IT TOOLS AND BUSINESS SYSTEMS

 July, 2013M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions
and PART TWO contains FIVE questions.
2. PART ONE is to be answered in the OMR ANSWER SHEET only, supplied with the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will
be supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer
book for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS                                                    TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most appropriate one and enter in the “OMR” answer sheet supplied with the question  paper, following instructions therein. (1x10)

1.1 Which of the following is fastest memory?
A) Secondary Memory
B) Auxiliary Memory
C) Cache Memory
D) Virtual Memory
Answer

Paper M1-R4: IT TOOLS AND BUSINESS SYSTEMS-jan-13

 January, 2013
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book
for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS                                                      TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)
1.1 Decimal equivalent of the binary number 110111 is:
A) 55
B) 56
C) 57
D) 58
Answer 

1.2 Numbers in base 10 are called as
A) Octal System
B) Hexadecimal System
C) Decimal System
D) Binary Numbering System
Answer 

July, 2012
M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:

1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will
be supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book
for PART TWO immediately after handing over the answer sheet for PART ONE.
TOTAL TIME: 3 HOURS                                                        TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most

appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)

1.1 Which of the following is not UNIX based?
A) Mac OS
B) Fedora
C) MS-DOS
D) Android
Answer

Paper IT TOOLS AND BUSINESS SYSTEMS Jan-12

January, 2012

M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.
TOTAL TIME: 3 HOURS                                                          TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)

1.1 A light-sensitive device that converts drawings, printed text or images into digital form
A) mouse
B) scanner
C) keyboard
D) laser printer
Answer

 July, 2011

M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:

1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.

2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.

3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3                                                                          HOURS TOTAL MARKS: 100
                                                                                                      (PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)

1.1 Multiprocessing means
A) Simultaneous processing with two or more processes
B) Simultaneous running of two or more programs
C) Running of two or more processes
D) None of the above
Answer 

Paper IT Tools and Business Systems January 2011

 January, 2011

M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book for
PART TWO immediately after handing over the answer sheet for PART ONE.
TOTAL TIME: 3 HOURS                                                                         TOTAL MARKS: 100

(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)

1.1 Which of the following is a communication device?
A) Printer
B) Monitor
C) Keyboard
D) Modem
Answer

Paper IT Tools and Business Systems -July-2010

M1-R4: IT TOOLS AND BUSINESS SYSTEMS

NOTE:
1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and
PART TWO contains FIVE questions.
2. PART ONE is to be answered in the TEAR-OFF ANSWER SHEET only, attached to the
question paper, as per the instructions contained therein. PART ONE is NOT to be
answered in the answer book.
3. Maximum time allotted for PART ONE is ONE HOUR. Answer book for PART TWO will be
supplied at the table when the answer sheet for PART ONE is returned. However,
candidates, who complete PART ONE earlier than one hour, can collect the answer book
for PART TWO immediately after handing over the answer sheet for PART ONE.

TOTAL TIME: 3 HOURS                                                                               TOTAL MARKS: 100
(PART ONE – 40; PART TWO – 60)

PART ONE

(Answer all the questions)

1. Each question below gives a multiple choice of answers. Choose the most
appropriate one and enter in the “tear-off” answer sheet attached to the question
paper, following instructions therein. (1x10)
1.1 Which of the following is a non-volatile memory?
A) Random Access Memory
B) Read Only Memory
C) Virtual Memory
D) Cache Memory
1.2 MIDI means
Answer

Line Configuration

A network is a combination of more than one devices which connect from some medium (wire , wireless) called channel line configuration refer physical communication channel  access method . Three types of access method are follows..

• Point to Point
• Multi Point

Computer Fundamental MCQ answer

This is 50 question/answer set useful for BCA, MCA, O Level,CCC,PGDCA students 

Q 1 : Basic Application of computer

(A)Education

(B)Games

(C)Business

(D)All the above

Q 2 : Technology after IC

(A)LSI

(B)VLSI

(C)SSI

(D)All the above

Difference between Computer Architecture and Computer Orgzanization

Computer organization

This is implementation of Computer Architecture. It deals with operational feature of computer that how hardware are working by Computer Architecture and helps programmer to understand working model of hardware and enables them coding for accessing different method of hardware and interrupt ,control signal etc.

Modes of channel operation

Mode of channel operation define accessing mode of the medium for send and receive data. Types and examples of different types of modes are follows

Simplex

Data in simplex channel is always moves in one direction. Simplex is suitable for many kind of application where reply is necessary because it is not possible to send back error or control signals to the transmit end.

Proper Case String VB

Function Name : StrConv

Convert a string into desire specified format.

Syntax

StrConv(String,VbStrConv) as String 

Difference Between Coupling and Cohesion

Coupling Indicate the relationship between the different modules. Cohesion indicates a relation inside of a single module.

Resized and Saved Uploaded Image in PHP

Image resizing is an important task because if uploaded image size is bigger than requirement and we are not resizing it then it will consume server space and bandwidth which is not good.
So Resizing is necessary .you need to use four PHP GD functions for achieve this.

• getimagesize
• imagecreatetruecolor
• imagecreatefromjpeg
• imagecopyresized
• imagejpeg

imagejpeg PHP GD Function

Creates and output an image to browser or saved into a file

Syntax:

bool imagejpeg ( resource $image [, string $filename [, int $quality ]] )

imagecopyresized PHP GD Function

Copy and resized the specific part of an image

Syntax:

bool imagecopyresized ( resource $dst_image , resource $src_image , int $dst_x , int $dst_y , int $src_x , int $src_y , int $dst_w , int $dst_h , int $src_w , int $src_h )

imagecreatefromjpeg PHP GD Function

Create a new image from a url or uploaded by file control

syntax:

resource imagecreatefromjpeg ( string $filename )

Argument Detail:

filename Path to the JPEG image.

Return Values :

imagecreatetruecolor PHP GD Function

The imagecreatetruecolor () function is used in PHP to create a new true color image using the GD Library.

resource imagecreatetruecolor ( int $width , int $height )

width
Image width for creating

height
Image height for creating

getimagesize PHP Function

Get the size of an image

array getimagesize ( string $filename [, array &$imageinfo ] )

The getimagesize() function will determine the size of any given image file and return the dimensions along with the file type and a height/width text string to be used inside a normal HTML IMG tag and the correspondent HTTP content type.

list($width, $height) = getimagesize($_FILES['file']['tmp_name']);
echo $width;
echo $height;

Difference between Terminal and Non-Terminal Symbols (Compiler Design)

Terminal Symbol

• A terminal is a symbol which does not appear on the left-hand side of any production.
• Terminal symbols cannot be changed using the rules of the grammar.
• terminal symbols, which are the characters of the alphabet that appear in the strings generated by the grammar.
• a terminal symbol is one that cannot be broken down further, e.g. a literal character or digit (but not necessarily as it depends on the grammar).

example : Contant etc

Histogram Digital Image Processing

The histogram is in digital image processing used to indicate the intensity of colors with the help of graph as follows

Passing Dynamic Array to function in php

<?php
function test_array($ar)
{
for($i=0;$i<count($ar);$i++)
{
  echo  "<br>" . ($i+1) . "'st element value " . $ar[$i];
}
}
?>

Get Record gridview to window control by select a row form gridview

Private Sub DataGridView1_RowHeaderMouseClick_1(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellMouseEventArgs) Handles DataGridView1.RowHeaderMouseClick

Context Free Grammar

     The analysis phase of a compiler breaks up a source program into constituent pieces and produces an internal representation for it, called intermediate code. The synthesis phase translates the intermediate code into the target program. 

     Analysis is organized around the "syntax" of the language to be compiled. The syntax of a programming language describes the proper form of its programs, while the semantics of the language defines what its programs mean; that is, what each program does when it executes. For specifying syntax, we present a widely used notation, called context-free grammars or BNF (for Backus-Naur Form)

Compilation Process

=====> COMPILATION PROCESS <======

                     |

                     |---->  Input is Source file(.c)

                     |

                     V

            +=================+

            |                 |

            | C Preprocessor  |

            |                 |

            +=================+

                     |

                     | ---> Pure C file ( comd:cc -E <file.name> )

                     |

                     V

            +=================+

            |                 |

            | Lexical Analyzer|

            |                 |

            +-----------------+

Print array without using loop in c language

Q . Write a program to print an array value without using loop.

#include<stdio.h>

#include<conio.h>

/*  Girfa : student Help

    for more question visit: http://girfahelp.blogspot.in/2012/09/some-program-of-c-language.html

*/

void main()

{ int ar[5],i=0;

clrscr();

goinput:

if(i<5)

{

Scrollbar Using HTML

<html> <head> <title> Girfa : Scrollbar Demo </title> </head> <body>

Image Map Highlighter

Image map is used to provide different type of links on image at a any specific place.

Image map help you to provide many links on a single image which is requirement of many fields. I am going to show you an example of e paper for a print paper which is totally based on image map ..

Office and Computer Fundamental MCQ Question Answer

1 By default how many tabs are shown in word
(A)7
(B)8
(c )9
(D)6
2 shortcut of subscript in word
(A)Contl+=
(B)Cntl+=
(c )Cntl++
(D)Both a & b
3 Type writer font
(A)typeface
(B)algerian
(c )times new roman
(D)Courier

Password Validation Check C Language Program

#include<stdio.h>
#include<conio.h>
/******************************************
Develop By Girfa
Visit : http://girfahelp.blogspot.in/2012/09/some-program-of-c-language.html
*******************************************/
void main()
{
char pass[20],ch;
int i,number,special,capital,small;
number=special=capital=small=0;
clrscr();

3gvs4g

CCC (Computer Basic) MCQ Question Answer

1 a sesitive device that convert printed material into its equivalent digital form

 (A)scanner (B)ocr ( C)a and b (D)None of these

2 Which protocol provide email facility

 (A)FTTP (B)SMTP ( C)SNTP (D)HDLC

3 The basic architecture for digital computer was developed by

 (A)Bill Gates (B)Charles Babbage ( C)John Von Neumann (D)Garden Moore

4 Decimal (128) Hex Equal is (?) 

 (A)20 (B)30 ( C)40 (D)80

Image Map HTML

<html>
<head>
<title>Girfa : Image Map</title>
</head>
<body>
<img src="1.jpg" usemap="#planetmap" >
<map name="planetmap" >
  <area shape="rect" coords="0,0,82,126" href="2.htm" alt="Sun" title="Get Report">
  <area shape="rect" coords="150,90,320,620" href="2.jpg" alt="Sun" title="Strong Man">
  </map>
</body>
</html>

Color-Tringle-c-clanguage-program

Color Triangle C Language Program with full code.This program creates a dynamic triangle based on user input and print message when  tringle size exceeded.

#include<stdio.h>
#include<conio.h>
/* Girfa : Student Help
   Color triangle example
   for program visit :
   http://girfahelp.blogspot.in/p/c-language.html
*/
void main()
{

MCQ Question Answer Software Free Download

Download complete MCQ Question Answer Total Free of cost for 32 bit

Download Computer Fundamental Test

Language Processor

Basically Translater i.e. Compiler and Interpreter 

If a language processor is a translator that produces machine or assembly code as output (in object code or executable code) then it is called a compiler. If the language processor executes the translated program (output from the translator) then it is called an interpreter.

Next Topic

Relocatable VS Non- Relocatable Programming

A relocatable program may use many part of memory address in run time of a program. This type of program uses relative addressing and its address space can be change at run as requirement.

A Non-Relocatable program runs in  fix address space. Location of program data fix at the time of compilation.

Next Topic

Graphics : Draw Hut Using VB.Net

 Dim myPen As New System.Drawing.Pen(System.Drawing.Color.White)
        Dim formGraphics As System.Drawing.Graphics
        formGraphics = Me.CreateGraphics()
        formGraphics.DrawLine(myPen, 300, 135, 800, 175)
        formGraphics.DrawLine(myPen, 300, 135, 175, 300)
        formGraphics.DrawLine(myPen, 300, 135, 400, 300)

Byte Code

" Middle level output of a compiler "

High level languages like (C,C++,Java,C#) are  easy to code , Programmer write code using a text editor or IDE  provide by related language compiler called source code.

Source code cannot run direct by computer it need to be transform into machine language by compiler.

Difference between Syntax and Semantic

Syntax	Symantic
Syntax is related to language grammar, i.e. in C language every statement is terminated by semicolon (;) if you missed it, then compiler will generate a syntax error (statement is missing)	Semantic is related to meaning which cannot be detected by the compiler. Wrong implementation of a logic will not produce expected output. For example, we know when the product of a number has to calculate then we must use (*) if by mistake or any other reason (+) are there then it is semantic bug.

Next Topic

XML VS Json

Fetch Data From Server With Json

data.json file code :

{"Roll":"101","name": "Sona", "city": "Australia"}

HTML Code

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Girfa : Json Tutorial Read Data From Server File</title>
<script language="javascript">
function readData(){

Data Communication and Networking MCQ Question Answer

1. Network of networks is known as _________
A. intranet.
B. internet.
C. Local Area Network
D. WAN.
ANSWER: B
2. A computer networks can provide a powerful _________ among employees.
A. communication medium.
B. community development.
C. relationship development.
D. relationship development.

Networking Basic MCQ Question Answer

11.1 Internet is

a. a local computer network

b. a world wide network of computers

c. an interconnected network of computers

d. a world wide interconnected network of computers which use a common protocol to communicate with one another

11.2 The facilities available in the internet are

(i) electronic mail

(ii) remote login

(iii)file transfer

(iv)word processing

SYSTEM ANALYSIS AND DESIGN MCQ Question Answer

Q. 1 …………………………. is an important factor of management information system.
A) System
B) Data
C) Process
D) All
ANS:     A) System

Q.3 ………………………….. level supply information to strategic tier for the use of top management.
A) Operational
B) Environmental
C) Competitive
D) Tactical
ANS:  D) Tactical

Q.4  In a DFD external entities are represented by a
A) Rectangle
B) Ellipse
C) Diamond shaped box
D) Circle

HTML MCQ Question - Answer

1. A webpage displays a picture. What tag was used to display that picture?
a. picture
b. image
c. img
d. src
2. <b> tag makes the enclosed text bold. What is other tag to make text bold?
a. <strong>
b. <dar>
c. <black>
d. <emp>
3. Tags and test that are not directly displayed on the page are written in _____ section.
a. <html>
b. <head>
c. <title>
d. <body>

Excel Practice File : Attendance Sheet

Download Excel File 

Sale Invoice

Download Excel File

Inquiry Report 

Download Excel File

Rate Depreciation List for Car Sale

Download Excel File

RSA Alogorithm

The RSA algorithm is an example of asymmetric cryptography, which is widely used in worldwide for securing sensitive while sending insecure medium like the internet.

RSA was first described in 1977 by Ron Rivest, Adi Shamir and Leonard Adleman of the Massachusetts Institute of Technology. Two types of keys are used, public and private. Private is secrete key used by the owner or receiver. Data can be encrypted using a public or private key, but decryption can be done only with the private key.

Form Validation,File Type Validation : Javascript

It’s a good practice to validate your form using script before sending because it’s giving quick response than server validity. But keep in mind server validation is always necessary because JavaScript may be disabled by the user. So server validation is mandatory. I am presenting complete code for validating a check box, textbox and file. My main focus is on file validating because file validation is complicated task for new web developers So this will help you a lot.

<html>
<head>
<title>Java script form validation ; Girfa</title>
<script language="javascript">
function validate_mar_news(pic,fl,code) //validate add news pic for home page marquee
{
var check_box=document.getElementById(pic);
var file=document.getElementById(fl);
var code=document.getElementById(code);
var flag=true;
if(check_box.value=="Select Page Number")
{

Object oriented programming and UML Objective (MCQ) Questions

9.1 Computer systems are designed by

a. simplifying requirements of system

b. breaking of the system into smaller self-contained co-operating subsystems
c. breaking up the systems into independent parts

d. modular design

9.2 Functions and procedures are

a. not useful in designing computer systems

b. old fashioned and they are not useful

c. useful in designing computer systems

d. have side effects which require special care if they are used as subsystems

MS Access MCQ Question/Answer

1. What Are The Different Views To Display A Table

 A) Datasheet View
 B) Design View
 C) Pivote Table & Pivot Chart View
 D) All Of Above

2. Which Of The Following Creates A Drop Down List Of Values To Choose From?

 A) Ole Object
 B) Hyperlink
 C) Memo
 D) Lookup Wizard

PHP Inheritance

class test
{
function test_base()
{
echo "<br>Base class function";
}

}

class client extends test
{
function client_function()
{
echo "<br>Inside of client function ";
}
}

PHP Class Object Tutorial

class test
{
function test_class()
{
echo "<h1>by default function is public visibility </h1>";
}
function add_num($n1,$n2)
{
return $n1+$n2;
}
private function test_private()
{
echo "<h2> For making private function private keyword is used </h2>";
}
function access_private()
{
$this->test_private();
}
}

Difference between Top-Down and Bottom- Up Programming

Top Down Programming

Top down approach is used by procedure oriented language like C. In this concern A problem is solved by the top level wise i.e. A main function is created which draw a sketch that how will our program be started and then find out the low level modules further. The problem is divided into the sub modules and implemented each coding separately, which called and control by the main function. Top down approach is no longer popular today.

Bottom Up Programming

Bottom up approach is used by the object oriented language like C++, Java, C#, VB.Net, etc. In this approach design starts with bottom level , by inside of a class. Ones A class is implemented, then object of that class is created. A main function is generally also used here like procedure oriented  languages as a starting point, but it’s used only to call the class functions.

Calculate Totient number from given number

Q : Write a program to get Totient number from given number?

[     Totient number = All prime number(M)<given prime number(N)
      l.e. N=10
     M={1,3,5,7}=4

]

Answer : 

/*   ::: Girfa :::

http://girfahelp.blogspot.in/p/c-language.html

program : get all prime number less than given number   */

Symmetric Encryption

 " Data format changed using a secret key and can be decrypted only with this secret key receiver must have the secret key for decrypt message. Symmetric Encryption. " 

Symmetric encryption is the oldest and best-known technique. A secret key, which can be a number, a word, or just a string of random letters, is applied to the text of a message to change the content in a particular way. This might be as simple as shifting each letter by a number of places in the alphabet. As long as both sender and recipient know the secret key,

Bridge : Computer Network

  " Bridge is May be a combination of hardware and software or individual is used to connect two segment of same LAN (Same IP Domain). Bridge decreases the network traffic and also used to connect two different platform LANs like UNIX and Windows. " 

    A network bridge is software or hardware that connects two or more networks so that they can communicate.

    People with home or small office networks generally use a bridge when they have different types of networks but they want to exchange information or share files among all of the computers on those networks.

     Here's an example. Let's say you have two networks: in one, the computers are connected with cables; and in the other, the computers are connected using wireless technology. The wired computers can only communicate with other wired computers, and the wireless computers can only communicate with other wireless computers. With a network bridge, all of the computers can communicate with each other.

Reading PHP and MySQL a Single Value from a table

When you want to read a single value from a MySQL table following code will help you.

Your need to fetch row using query function with following syntax

     [connection_object]->query(sql statement)

After fetched rows use mysqli_fetch_assoc function for access row by row records
 

    Var_name= mysqli_fetch_assoc([connection_object]->query(SQL Statement))

mysqli_fetch_assoc returns one dimensional array so use can use table column name as index

What is cable Modem

" Simply Dish cable connection to homes "

A cable modem is used in homes for cable services provide by the service provider.Coaxial cable is used to connect our home to cable operator office a modem is attached with television, which convert analog signal to digital signal Vice-Versa.